This high-quality reinforced silicone hose allows for simple removal of the failure-prone after run coolant pump found on B5 Audi S4 and C5 Audi A6/Allroad models equipped with the 2.7T engine. Simply remove your auxiliary water pump and hoses, and replace them with this silicone hose. New hose clamps are included!

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

Our turbo inlet hose features OEM fitment and is constructed from high quality, automotive grade silicone with 4 layers of reinforced nylon for ultimate durability. With a larger inside diameter than the stock hose, it flows more air than the OEM corrugated hose.

Replace your restrictive OEM Audi bipipes with 034Motorsport's High-Flow Stainless Steel Bipipe Set for the 2.7T! Eliminate a major bottleneck in the 2.7T motor while improving boost response.

Engineered utilizing CAD software to ensure perfect fitment and optimal flow. Manufactured from precision mandrel-bent 304 Stainless Steel to minimize heat transfer from the engine bay to the charge air. Constructed utilizing 2" diameter tubing with flared ends to mate up snugly with OEM or aftermarket intercooler outlet hoses and throttle body boots. Each bipipe features beaded ends to prevent hoses from blowing off under boost, and 1" nipples for diverter valves. "Stealth" water-methanol injection bungs are welded underneath each of the bipipes to accommodate WMI kits.

034Motorsport's billet aluminum block breather adapter for the 1.8T is precision CNC machined in-house to ensure unsurpassed quality and perfect fitment.

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

Dette komplette silikonslangesettet er designet for å erstatte all den smuldrende plasten og gummien som er fabrikkens lufteslangesystem. 034Motorsport Billet PCV tilbakeslagsventil er inkludert i dette settet!
 

The 034Motorsport MQB Insuction Bundle for Audi 8V A3/S3, 8S TT/TTS, and VW MkVII Golf/Golf R/GTI includes all of the 034Motorsport intake performance products associated with the OEM airbox in one comprehensive and convenient package. Included with this kit is the Turbo Inlet Pipe, Turbo Inlet Hose, Performance Drop-In Panel Air Filter, and all associated hardware.

This performance polyurethane snub mount fits most Audi vehicles manufactured through 2001, and is designed to increase stabilization of the motor under acceleration. Our polyurethane snub mount is a direct replacement for the stock snub mount, and offers much longer life and drastically improved performance by reducing unwanted engine movement.

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. Prevent boost leaks and replace a common failure point with this durable, performance engineered part made from high-quality automotive silicone.

This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

Replace the crumbling, leaky factory check valve inlet hose with our new reinforced silicone hose, a direct fit for OEM that will literaly last as long as you own the car.

Secondary air injection blockoff plate set for V6 30V cylinder heads with the SAI system removed, perfect for those of you swapping SAI-equipped big port 2.8L 30V heads onto your 2.7T.

034Motorsport is proud to offer our Silicone Throttle Body Inlet Hose for the B8 Audi S5 4.2L FSI V8! This hose is designed to replace the restrictive corrugated plastic unit, our hose features a larger internal area and smooth insides for higher flow and life long durability. This durable, high quality silicone hose was modeled directly off of the factory part to ensure perfect fit and finish, and extensively tested at 034Motorsport and by our development partner, JH Motorsports. In addition to cloth reinforcement, this hose features stainless steel wire reinforcement to prevent collapse under vacuum.

This performance polyurethane snub mount fits most late-model Audi vehicles manufactured after 2002, and is designed to increase stabilization of the motor under acceleration.

Our 70 durometer polyurethane snub mount is a direct replacement for the stock snub mount, and offers much longer life and drastically improved performance by reducing unwanted engine movement.

Replace the unattractive and restrictive OEM corrugated plastic turbo inlet hose the the 034Motorsport Turbo Inlet Hose.

Installation Effort: EASY

034Motorsport Street Density and Track Density Transmission Mounts for the 5-MT B6 Audi A4 are now available! These mounts are offer a substantial reduction in drivetrain movement over the factory transmission mount, resulting in improved shift quality and throttle response. Torque Specifications - Tighten M8 Bolts to 25 Nm with Blue Loctite - Tighten M10 Bolt to 70 Nm

Den 034Motorsport 3.0 TFSI Supercharger 179mm Crank Trinse oppgradering for B8/B8.5 Audi S4/S5/Q5/SQ5 & C7 Audi A6/A7 er en enkel måte å øke superlader rotasjonshastighet for å gi mer boost til motoren. Dette settet fungerer med både OEM supercharger-remskiven og 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade.

NOTAT: Ytelsesprogramvare selges separat og er nødvendig for å kunne bruke denne remskiven trygt og for at denne remskiven skal gi en ytelsesfordel.

Installasjon innsats: MEDIUM

Den 034Motorsport 3.0 TFSI Supercharger 190mm Crank Trinse oppgradering for B8/B8.5 Audi S4/S5/Q5/SQ5 & C7 Audi A6/A7 er en enkel måte å øke superlader rotasjonshastighet for å gi mer boost til motoren. Dette settet fungerer med både OEM supercharger-remskiven og 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade.

NOTAT: Ytelsesprogramvare selges separat og er nødvendig for å kunne bruke denne remskiven trygt og for at denne remskiven skal gi en ytelsesfordel.

Installasjon innsats: MEDIUM

Replace your restrictive OEM Audi bipipes with 034Motorsport's High-Flow Stainless Steel Bipipe Set for the 2.7T! Eliminate a major bottleneck in the 2.7T motor while improving boost response.

Engineered utilizing CAD software to ensure perfect fitment and optimal flow. Manufactured from precision mandrel-bent 304 Stainless Steel to minimize heat transfer from the engine bay to the charge air. Constructed utilizing 2" diameter tubing with flared ends to mate up snugly with OEM or aftermarket intercooler outlet hoses and throttle body boots. Each bipipe features beaded ends to prevent hoses from blowing off under boost, and 1" nipples for diverter valves. "Stealth" water-methanol injection bungs are welded underneath each of the bipipes to accommodate WMI kits.

034Motorsport's high-quality silicone PRV Pipe to Turbo Inlet Hose for B6 1.8T.

Constructed from 4-ply high-temperature automotive grade silicone, this will not crumble apart or rip like the factory rubber hose.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system. Fits transverse 1.8T cars with engine codes AWV, AWW, and AWP through the 2002 model year.

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

Replaces OEM part number 06A 103 221BK.

Tired of looking at the unsightly factory battery blanket every time you pop the hood? So were we - that's why we created the 034Motorsport Carbon Fiber Battery Cover for 8V Audi A3/S3 & MkVII Volkswagen Golf/GTI/R.

This high quality carbon fiber piece is designed to perfectly complement 034Motorsport's X34 Intake System, Engine Cover, and Fuse Box Cover for a true OEM+ engine bay appearance. The Carbon Fiber Battery Cover fits snugly over the factory battery blanket and is secured by magnets.

The stock rubber 2.7T Throttle Body Inlet Boot is notorious for ripping and causing leaks, usually at the worst possible time. 034Motorsport's high quality silicone replacement is modeled off the factory hose to ensure excellent fitment, and has beefy 4-ply reinforced silicone construction to withstand increased boost pressures up to 22 PSI.

For applications running higher boost, we recommend using our 034Motorsport High-Flow Stainless Steel Bipipe Set.

Please Note: Some trimming of the MAP sensor provision may be required to fit the factory plastic engine cover, as the silicone is more robust than the flimsy factory rubber.

034Motorsport's new Billet Aluminum Intake Manifold Flap Linkage Pair for the B7 Audi RS4 allow for replacement of the failure-prone plastic factory linkages, without having to purchase a new intake manifold. The stock plastic linkages become brittle with age, and can break easily when working on or around the intake manifold.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Dette er et sett med reservedeler for vår eksosmanifold for 1.8T-motorer. Dette settet inneholder 3 utskiftningsbolter, en utskiftningslåseplate og en utskiftningspakning mellom turboen og manifolden.

Installasjonspåkjenning: LETT