034Motorsport er stolte av å tilby denne høykvalitets Supercharger remskiveoppgraderingen for B8/B8.5 Audi S4/S5/Q5/SQ5 & C7/C7.5 Audi A6/A7 3.0T FSI!
Med en diameter på 57,70 mm er 034Motorsport 3.0 TFSI Supercharger-remskiven betydelig mindre enn fabrikkenheten for å øke drivforholdet til kompressoren. Ved å spinne kompressoren raskere får du økt boosttrykk i hele RPM-området, noe som resulterer i økte hestekrefter og dreiemoment i hele kraftbåndet når det pares med Stage 2 Performance Software.
Merk: 034Motorsport 3.0 TFSI Performance Software selges separat og kreves for at denne remskiven skal gi en ytelsesfordel.

Erstatt de feilutsatte, plastiske 3.0 TFSI supercharger bløderskruene med 034Motorsport 3.0 TFSI Supercharger Bleader Screw Kit for Aud B8 / B8.5 / C7 / D4 S4 / S5 / Q5 / SQ5 / A6 / A7 / A8 kjøretøy. OEM-bløderskruene er ikke designet for flere bruksområder, og den myke plasten kan lett bli skadet til det punktet hvor de ikke lenger kan løsnes eller strammes. Disse CNC-maskinerte billet 304 bløderskruene i rustfritt stål er tøffe nok til en levetid på modifikasjoner på din 3.0 TFSI kompressormatede motor.

NOTAT: Ikke over dreiemoment bløderskruene. Maksimalt dreiemoment er 5 NM. Over torquing kan føre til at bløderen bung bryter av.

034Motorsport 5-ventil Cam Tensioner Tool ble designet for å erstatte OE plastverktøy (verktøy # 3366), som er utsatt for å bryte. Andre kamstrammerverktøy er praktisk talt engangsbruk og engangsbruk på grunn av hvor svake de er. Dette kamstrammerverktøyet har livstidsgaranti, er maskinert fra 6061-T6 billet aluminium for overlegen styrke og er tydelig anodisert for et flott utseende som vil motstå korrosjon. Bolten som følger med dette settet er allment tilgjengelig, slik at den enkelt kan byttes ut hvis gjengene noen gang blir skadet.

Disse Denso IKH01-24 tennpluggene er ideelle for biler med ytelsesprogramvareoppgraderinger og / eller turboladeroppgraderingssett som kjører økt boosttrykk. Disse iridiumpluggene med lang levetid vil overleve og overgå fabrikkens tennplugger. Disse tennpluggene er en anbefalt ytelsesoppgradering for Audi 8S TTRS & 8V.5 RS3 2.5 TFSI tenningssystem, og erstatter delenummer 06K 905 601 M.

Notat: Prisen som vises er for hver tennplugg.

034Motorsportâ € ™s Silikon gasspjeld Body Inlet Hose kan du beholde fabrikken airbox når du oppgraderer B8 Audi Q5/SQ5 3.0 TFSI til 74mm Porsche 997 / 911 gasspjeldhus.

I tillegg til å ha et flyttet gasspjeldhusinntak med en innvendig diameter på 82 mm for å imøtekomme det større gasspjeldhuset, eliminerer denne slangen fabrikkdelens ™integrerte inntaksdemper og har et større tverrsnittsareal og glatte innside for forbedret ytelse.

Denne slangen ble designet internt på 034Motorsport spesielt for Supercharged V6 Q5 / SQ5-modeller med en 74 mm gasspjeldhusoppgradering, og grundig testet med hjelp av uavhengige Audi-entusiaster.

Portrengjøringsverktøyet 034Motorsport Direct Injection Head gjør det kort og enkelt å fjerne karbonavleiringer fra inntaksporter og ventiler. Verktøyet har en liten port for en medieblåsestav og en stor port som kobles til en butikkvakuumslange. Vakuumet som genereres av støvsugeren holder verktøyet på plass mot inntaksporten, og frigjør hendene dine til å fokusere på medieblåsing.

034Motorsport er stolte av å kunne tilby vår silikon gasspjeldhus innløpsslange til Audi Q5/SQ5 3.0 TFSI Supercharged V6!

Denne oppgraderte luftinntaksslangen er designet for å erstatte den restriktive bølgepappenheten og den integrerte inntaksdemperen, og har et større tverrsnittsareal og glatt innside for høyere strømning og økt ytelse.

Denne holdbare silikonslangen av høy kvalitet ble modellert direkte fra fabrikkdelen for å sikre perfekt passform og finish, og grundig testet hos 034Motorsport ved hjelp av uavhengige Audi-entusiaster. I tillegg til tøyforsterkning har denne slangen rustfritt ståltrådforsterkning for å forhindre kollaps under vakuum.

034Motorsport har gleden av å presentere vår X34 karbonfiber Audi TTRS 8J og RS3 8P kaldluftinntakssystem for 2,5 TFSI! Dette inntaket gir hestekrefter og dreiemomentgevinster i hele kraftbåndet, med toppgevinster på opptil 16 veivhestekrefter og 13 fot dreiemoment på lager turbotunes, og over 35 veivhestekrefter og 24 fot kg med en oppgradert turbolader.

034Motorsports ingeniører brukte omfattende arbeid på å utvikle en komplett kaldluftinntaksløsning for TT RS som gir hestekrefter og dreiemomentgevinster i forhold til den veldesignede fabrikkens luftboks, noe som til slutt resulterte i dette vakkert produserte karbonfiber kaldluftinntakssystemet.

These billet aluminum inserts are designed to fill the voids in the factory B6/B7 Audi A4/S4/RS4 rear differential carrier mounts, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, this insert eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.

Installation is very simple, can be performed in minutes, and is completely reversible.

Complete factory rear subframe bolt kit for the 8V/8V.5 Audi A3/S3 Quattro & MkVII Volkswagen Golf R. We recommend using these new factory stretch bolts to install the 034Motorsport MQB Audi/Volkswagen AWD Rear Subframe Mount Insert Kit.

The 034Motorsport Billet Aluminum Rear Subframe Mount Inserts for 8J/8P Audi TT/TTS/TTRS & A3/S3/RS3 Quattro, MkV/MkVI Volkswagen R32 & Golf R are designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential. By filling small voids in the four factory mounts in addition to limiting vertical movement, this insert kit eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement. Please Note: The four factory rear subframe bolts can be reused at the torque specified in our Installation Guide. If you wish to purchase new stretch factory hardware, the part number for these bolts is N10505301.

These billet aluminum inserts are designed to fill the voids in the factory B8 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & C7 Audi A6/S6/RS6, A7/S7/RS7 rear differential carrier mounts, and limit rear differential movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, these inserts eliminate the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.

Installation is very simple, can be performed in minutes, and is completely reversible.

These billet aluminum inserts are designed to fill the voids in the front-most factory mount for the rear differential, and limit unwanted drivetrain movement without sacrificing ride quality or introducing any additional noise, vibration, or harshness into the cabin. By filling the voids in the factory mounts, this insert kit eliminates the associated slop and ensures that you're experiencing smoother shifting and throttle transitions, and an improved driving experience.

We highly recommend installing our Transmission Mount Insert with this part to minimize unwanted drivetrain movement!

The 034Motorsport Billet Aluminum Rear Differential Mount Insert Kit for B9 Audi A4/S4/S5/RS5 & Allroad is designed to limit movement in the factory rear differential mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential.

By filling small voids in the factory mounts, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement.

034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone cast aluminum factory rear main wiper seal on your 2.7T Audi. This Billet Rear Main Seal is CNC machined from 6061-T6 Aluminum and features an OEM Viton Elring seal with an integral tension spring to ensure a tight seal to the crankshaft.

034Motorsport is proud to offer the ultimate rear subframe reinforcement solution for the B5 Audi A4/S4/RS4 Quattro! The 034Motorsport Billet Aluminum Rear Subframe Reinforcement Kit is made from T6-6061 Billet Aluminum for maximum rigidity, and is designed to prevent failure of the rear subframe on B4/B5 Quattro vehicles, which is very common with upgraded rear sway bars.

The 034Motorsport Billet Aluminum Rear Subframe Mount Insert Kit for B8/B8.5 Audi S4/RS4, S5/RS5, Q5/SQ5 is designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential. By filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement. Please Note: The four factory rear subframe bolts can be reused at the torque specified in our Installation Guide. If you wish to purchase new stretch factory hardware, the part number for these bolts is WHT004756A.

The 034Motorsport Billet Aluminum Rear Subframe Mount Insert Kit for B8/B8.5 Audi A4/A5/Allroad is designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential. By filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement. Please Note: The four factory rear subframe bolts can be reused at the torque specified in our Installation Guide. If you wish to purchase new stretch factory hardware, the part number for these bolts is WHT004756A.

The 034Motorsport Billet Aluminum Rear Subframe Mount Insert Kit for B9 Audi A4/S4/A5/S5/RS5 & Allroad is designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential.

By filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement.

034Motorsport Billet Aluminium Dogbone Mount Insert for tidlig (opp til 2008.5) MkV Volkswagen Golf / Jetta / GTI / GLI / R32 & 8J / 8P Audi TT / A3 er nøyaktig maskinert for å fylle de store tomrommene i fabrikkens dogbone-montering, og begrense overføringsbevegelsen uten å ofre kjørekvaliteten eller introdusere merkbar støy, vibrasjon eller hardhet i hytta. Ved å fylle tomrommene i fabrikkfestet eliminerer denne innsatsen den tilhørende slopen for å sikre at du opplever skarpere skift og en jevnere kjøreopplevelse.

034Motorsport Billet Aluminum DSG Breather Catch Can for Audi 8S TTRS erstatter den lille OE-plastventilen og forhindrer at overføringsvæske blir tvunget ut og spruter rundt motorrommet. Enhver overføringsvæske som samles opp i fangsten, kan dreneres tilbake i overføringen. Forbedre utseendet på TTRS-motorrommet ved å installere denne vakre billetfangstboksen og eliminere stygge oljeflekker.

The 034Motorsport Billet Aluminum MQB Rear Subframe Mount Inserts for MkVII Volkswagen Golf R, 8V/8V.5 Audi A3/S3/RS3, & MkIII Audi TT/TTS/TTRS are designed to limit movement in the factory rear subframe mounts to maintain proper suspension geometry when cornering, and improve the responsiveness of the rear suspension and differential. By filling small voids in the four factory mounts as well as limiting vertical movement, this insert set eliminates the associated slop to ensure that you experience a more refined, connected driving experience, especially when driving at the limit. These billet aluminum parts will not pack and wear over time, and offer a lasting performance improvement. Please Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately below.

The 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for any MQB platform MkVII VW Golf/GTI/R, MkVII VW GLI, 8V/8V.5 Audi A3/S3/RS3 & MkIII Audi TT/TTS/TTRS using an aftermarket dogbone mount and lower dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs and wheel-hop, will cause the upper and lower dogbone mount assembly to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport MQB Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform flawlessly during these violent events.

Please Note: The MQB Upper Dogbone Mount Insert is now included in every MQB Spherical Dogbone Mount we sell.

034Motorsport's Billet Aluminum Shifter Bracket Bushing Kit is designed to improve shift quality and precision in transverse-engine Audi & Volkswagen vehicles with manual transmissions.

By replacing the factory rubber shifter bushings, these clear-anodized aluminum replacements prevent unwanted deflection, and ensure that your shifts are solid and precise.

The 034Motorsport Upper Dogbone Mount Insert (patent pending) recommended for any MkV/MkVI Volkswagen Golf/GTI/R/Jetta/GLI and 8P Audi A3 & 8J Audi TT/TTS/TTRS using any dogbone mount and lower dogbone mount insert. Aggressive driving that causes violent drivetrain movement, such as burn-outs and wheel-hop, will cause the upper and lower dogbone mount assembly to exert a bending moment on the OEM dogbone mount arm, causing it to bend, and in some cases fail. When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform flawlessly during these violent events.

034Motorsport's Billet Catch Can Kit is the most comprehensive and effective PCV System solution for the 8V Audi A3 & MkVII Volkswagen Golf/GTI.
 
034Motorsport's engineers designed the Billet Catch Can Kit to provide optimal crankcase ventilation while keeping oil and water vapor out of the intake tract, resulting in drastically reduced carbon buildup and extended life from the 2.0T EA888 Gen 3.